|
- Finish walls and ceilings 3 to 4 times faster
than with conventional methods. Clean up is minimized when used with a
vacuum attached to the tool, and finish is superior to other finishing
methods.
- Light weight -- weighs only 8 pounds.
- Operator can sand 10' ceilings without using
stilts or a scaffold.
- Motor is located on the opposite end of the
vacuum tube handle from the sanding head for best balance & control.
- Patented foam-backed abrasive sanding pads
virtually eliminate swirl marks.
- Articulating sanding head enables operator to
sand from top to bottom of a wall or ceiling without changing position.
- Brush type skirt surrounds the sanding pad
aiding in dust control, and preventing pad from gouging wall joint.
- Built in dust collection connector eliminated
kinking or twisting of vacuum hose.
- 1-1/4" vacuum hose is 13 feet long so
that large areas can be sanded in one set up.
- Variable speed dial (1,000 to 1,650 RPM)
adapts sanding pad speed to the application.
- Powerful 3.5 AMP motor features serviceable
brushes
- Standard equipment: Tool, 100 grit sanding
pad, 13 foot static dissipating 1-1/4" vacuum hose, hook & loop
straps for mounting power cord to vacuum hose, and operating manual. Vacuum
not included. See Model 7810.
|
|
|
|
